The Micsig ACP 1000 is a current clamp for the portable and tablet oscilloscopes of the Micsig ATO, STO and TO series as well as for other oscilloscopes with BNC connection. With an optional BNC banana adapter (not included), the probe can also be used with multimeters.
AC clamps can measure current signals with complex waveforms, e.g. transient start-up currents from power devices, sinusoidal currents from three-phase currents of three-phase power supplies, harmonic components of measured currents, current measurement of IGBTs and MOSFETs, etc.
| Model | ACP1000 |
|---|---|
| Rated output | 100 mV/A, 10 mV/A, 1 mV/A |
| Frequency | 10-100 kHz |
| Secondary burden | ≥100 kΩ |
| Accuracy class | 3% ±10 mV/2% ±5 mV/1% ±1 mV |
| Test current range | 0.1-1000 A |
| Operating frequency | 10 Hz-100 kHz |
| Max. working current | 2000 A (2 s) |
| Output signal | mV/A |
| Highes precision | 1% |
| Operating temperature | -15-+75°C |
| Safety class | CAT III 600 V |
| Max. conductor size | 52 mm |
| Dimensions (mm) | 111 x 216 x 45 |
| Output cable | 1.5 m insulated BNC/coax-cable can connect directly to an oscilloscope. Can also be used with multimeters with optional BNC/banana adaptor |
EN 
DE
Reviews
There are no reviews yet.